Doca Socket Relay

DOCA Socket Relay — Tasks

Where to start: The verbs that carry real workflow content are ## configure, ## run, ## test, and ## debug. The other two substantive verbs (build, modify) carry routing stubs because the Socket Relay is a shipped binary / container image, not a source artifact the external operator compiles or patches — the thing the agent modifies is the relay's invocation and deployment, not the relay itself. The ## test verb is an iterative loop (bind → connect → round-trip → admit fleet, with every state-changing operation re-opening the smoke), not a one-shot pass — see the eval-loop overlay in ## test below.

This file is loaded by SKILL.md after CAPABILITIES.md. It walks the agent through the six task verbs every artifact in this bundle exposes (configure / build / modify / run / test / debug), then explicitly defers task verbs that do not belong here, and ends with the Command appendix honoring the bundle's doca-structured-tools-contract/SKILL.md preamble.

For the Socket Relay, the verbs that carry real workflow content are configure, run, test, and debug. The other two verbs exist as anchors because the agent's task-verb contract is uniform across libraries, services, and tools — and each one carries a meaningful routing stub that names where the user's question really belongs.

configure

The Socket Relay's configuration is the three-axis decision documented in CAPABILITIES.md ## Capabilities and modes — deployment shape × socket type / protocol × forwarding endpoint — layered on top of the precondition that DOCA is installed on the side the operator is about to invoke the relay from. The relay does not carry a separate config file or daemon contract of its own beyond what the chosen deployment shape pulls in (a service-container deployment inherits the per-service config-file mount contract from doca-container-deployment CAPABILITIES.md ## Capabilities and modes (doca-container-deployment/CAPABILITIES.md#capabilities-and-modes)).

Steps the agent should walk the user through, in order:

1. Axis 1 — pick the deployment shape. Commit explicitly to one of the three shapes named in CAPABILITIES.md ## Capabilities and modes: in-process beside the host application, sidecar process / container next to the application on the same host, or container service container on the BlueField via the kubelet-standalone runtime. An answer that picks one shape without naming the alternatives has silently narrowed the relay to a single deployment story; surface the trade-offs (host-OS permission surface for in-process; lifecycle coupling for sidecar; the static-pod / image-pull / per-service config-file mount surface from doca-container-deployment ## configure (doca-container-deployment/TASKS.md#configure) for the container shape).

2. Axis 2 — confirm the host-leg socket type. The shipped doca_socket_relay binary uses AF_UNIX (Unix Domain Sockets, SOCK_STREAM) on its host leg as of DOCA 3.5 — the -s/--socket argument is a filesystem path, not an IP/port. If the user's wrapping application speaks TCP or UDP, the relay does not transparently bridge that — the user either changes the wrapping app to talk AF_UNIX or uses a different transport. Confirm what the relay binary actually supports on the installed version by running doca_socket_relay --help on the host before committing to a transport plan; do not invent transport modes the binary does not register.

3. Axis 3 — pick the forwarding endpoint on the DPU. Name the DPU-side terminator the relay forwards to (the relay's far half, a DPU-side service, or a documented BlueField service container that re-presents the bytes to the DPU peer). This is the most consequential axis for safety — a wrong forwarding endpoint produces a silent data-path break per CAPABILITIES.md ## Safety policy and is its own layer in ## debug. Do not commit to an endpoint that the agent has not confirmed exists from the DPU side.

4. Confirm the DOCA host install and version compatibility. Walk doca-version TASKS.md ## configure (doca-version/TASKS.md#configure) to capture the installed DOCA version on the side the relay will run, then apply the Socket Relay overlay in CAPABILITIES.md ## Version compatibility: confirm the relay artifact is shipped on this install profile and that its version agrees with the underlying doca-common. For the container-shape deployment, add the third anchor (the per-service container tag) per doca-container-deployment CAPABILITIES.md ## Version compatibility (doca-container-deployment/CAPABILITIES.md#version-compatibility). If the artifact is not present on the install profile, route to doca-setup ## install (doca-setup/TASKS.md#configure).

5. Identify the wrapping host application's pre-relay behavior. The smoke in ## test compares the application's with-relay behavior to its no-relay baseline; the agent should capture the baseline before any state-changing operation so the regression check is grounded. If the application has no pre-relay baseline (e.g. the DPU-side peer never existed without the relay), surface that — the regression check degrades into a one-sided liveness check and the agent should say so.

6. Plan the rollback path. Because every state-changing relay operation sits in the data path per CAPABILITIES.md ## Safety policy, the agent records: the pre-relay configuration the application used (which socket / port / path), the previous-known-good relay invocation (or a no-relay baseline) ready to re-apply, and a way to reach the operator if the deploy disrupts the host application. For the container-shape deployment, the rollback path layered on top is the static-pod-file removal documented in doca-container-deployment ## modify (doca-container-deployment/TASKS.md#modify).

For the canonical DOCA universal lifecycle that underlies any DOCA-library work the wrapping host application might also do once the migration moves past the relay phase (per the staged-migration framing in SKILL.md ## Related skills), see doca-programming-guide TASKS.md ## configure (doca-programming-guide/TASKS.md#configure). This skill is concerned with the operator-side configuration of the relay deployment, not the program-side lifecycle of any DOCA library a later phase introduces.

build

The Socket Relay binary / container image is shipped pre-built as part of every DOCA install / NGC catalog entry that includes it; there is no source tree the external operator is expected to compile, no build flags, no meson or make workflow for the relay itself.

What the operator does build, in some cases, is the wrapping host application — the socket-oriented service the operator is migrating onto the DOCA fabric via the relay. The build context for that application is the application's own existing build (the relay is intentionally transparent to it); the relay's purpose is to let the wrapping application stay buildable as-is. The agent should not invent a relay-specific build wrapper for an application whose existing build already produces a working binary against a local socket — the whole point of the relay is to leave that binary untouched.

Routing for nearby "build" questions:

• "The relay binary / image isn't there — do I need to build it?" → no. Route to doca-setup ## install (doca-setup/TASKS.md#configure) for the install path that ships the relay (and doca-setup ## no-install (doca-setup/TASKS.md#no-install) for the public NGC DOCA container alternative). For the container-shape deployment, route the image-pull / NGC tag lookup through doca-container-deployment ## configure (doca-container-deployment/TASKS.md#configure) step 4.

• "I want to build my wrapping host application against DOCA so I can drop the relay later." → not a relay-build question. Route to doca-programming-guide ## build (doca-programming-guide/TASKS.md#build) for the cross-library build pattern and the matching libs/<library> skill (doca-comch ## build (doca-comch/TASKS.md#build) for the control-plane rewrite, doca-eth/SKILL.md for the line-rate packet-I/O rewrite) for the library-specific overlay. The relay carries socket-shaped bytes today; the per-library build is what retires it later.

• "I want to build a custom DPU-side terminator that talks to the relay's far half." → not a relay-build question. The DPU-side peer is either a documented BlueField service container (route to doca-container-deployment/SKILL.md) or a program written against the matching DOCA library (doca-comch/SKILL.md for control-plane bridging, doca-eth/SKILL.md for line-rate data); route accordingly.

• "I want to extend the relay with a new transport / scenario." → out of scope here; this skill is for external operators consuming the shipped relay, not for contributors extending it.

The ## What this skill deliberately does not ship block in SKILL.md explicitly forbids adding a build recipe or wrappers for the Socket Relay; revisit that policy before changing this section.

modify

Do not modify the shipped Socket Relay binary / container image. It is an NVIDIA-shipped artifact; there is no documented public way to change its behavior, output format, or operation surface, and none should be invented.

What the agent does modify, every time, is the relay deployment — the deployment shape, the socket / forwarding-endpoint configuration, the invocation flags the public guide documents on the installed version. Two recurring modify shapes apply, and each is a HIGH-STAKES change per CAPABILITIES.md ## Safety policy that the agent must gate on a fresh ## test smoke:

1. Change the deployment shape without changing the forwarding contract. Move the relay from in-process to sidecar, from sidecar to a BlueField service container, or back, while keeping the forwarding endpoint and socket type / protocol the same from the host application's point of view. The application's view of what it is talking to is unchanged, but the precondition surface flips (host-OS permissions for in-process; lifecycle coupling for sidecar; the full static-pod / image-pull / per-service config-file mount contract from doca-container-deployment ## modify (doca-container-deployment/TASKS.md#modify) for the container shape). Re-walk ## configure axis 1 and the precondition step, then re-open the ## test smoke loop before declaring the change done.

2. Change the forwarding endpoint without changing the deployment shape. Repoint the relay at a different DPU-side terminator (a different DPU-side service, a different BlueField service container, a different address on the same terminator). The deployment-shape precondition surface is unchanged but the silent data-path break risk is at its highest — the host application keeps connecting to the same relay endpoint while its bytes are quietly delivered somewhere new (or nowhere). Re-walk ## configure axis 3 with the new endpoint confirmed reachable from the DPU side first, then re-open the ## test round-trip smoke before any other host client is admitted.

Routing for nearby "modify" questions:

• "The output format / log shape is inconvenient — can I change it?" → no, not inside this skill. The documented surface is the surface; if the user wants structured output, the right answer is "check whether the installed version exposes one per --help, otherwise write a parser against the documented format on your installed version" — and even the parser is out of scope per SKILL.md ## What this skill deliberately does not ship.

• "I need a different kind of bridging than the relay provides (programmatic control over channels, line-rate raw packet I/O)." → re-examine axis 1 of the design space: the relay is one half of the host ↔ DPU bridging picture, and the right answer may be a per- library rewrite via doca-comch/SKILL.md (control plane) or doca-eth/SKILL.md (line-rate data plane) rather than a relay re-configuration.

• "Can I patch the relay to add a feature?" → out of scope; this skill is for consumers of the shipped relay, not contributors to it.

run

The smoke-before-bulk flow — every relay deployment goes through it, no exceptions. The full invocation surface lives in the public DOCA Socket Relay guide reachable via doca-public-knowledge-map ## DOCA tools (doca-public-knowledge-map/SKILL.md#doca-tools); this section names the shape of the flow, not the verbatim command lines (per CAPABILITIES.md ## Safety policy "do not invent binary names, flag strings, socket-path defaults, or port numbers").

1. Confirm the binary / image, version, and deployment shape are in place. Per ## configure steps 1-4; without this, the next four steps will burn the operator's time on a deployment that the install does not actually support. For the container-shape deployment, add the doca-container-deployment ## run (doca-container-deployment/TASKS.md#run) steps 1-3 (image pulled, pod-spec dropped, kubelet shows Running) as preconditions to step 2 below.

2. Bind the relay on its configured endpoint. Start the relay on the side the chosen deployment shape names (in-process or sidecar on the host; service container on the BlueField); read the relay's own bound / listening signal from its --help-documented inspection surface or the container ENTRYPOINT log per doca-container-deployment CAPABILITIES.md ## Observability (doca-container-deployment/CAPABILITIES.md#observability). A bind failure here is layer 2 in ## debug; do not move on until the relay reports bound against the configured socket / port / path.

3. Confirm one host application client can connect. Bring up one host application client (not the fleet) and verify, from the application side and the relay side, that the connect succeeded: the application's own connect / send / recv error reporting reads clean, and the relay's DOCA log output at the installed -l/--log-level 50 (INFO) or 60 (DEBUG) records the expected accept/state transition. The shipped binary has no dedicated connection-list command. A "the relay accepts but no client appears" asymmetry here is layer 3 in ## debug; a "the application reports ECONNREFUSED / connect timeout" is layer 2 or 3 depending on which side the misconfiguration sits on.

4. Confirm one end-to-end round-trip. Drive a single, trivial round-trip from the host application through the relay to the DPU-side terminator and back — one request the operator already knows the expected response shape for. Capture all three views: the relay's byte received from the host signal, the DPU-side terminator's byte delivered signal (per its own observability surface, e.g. doca-comm-channel-admin TASKS.md ## run (doca-comm-channel-admin/TASKS.md#run) when the DPU-side peer is comch-backed, or doca-container-deployment ## run (doca-container-deployment/TASKS.md#run) step 4-5 when the peer is a BlueField service container), and the host application's response received signal. A "connection accepted but no bytes arrive" asymmetry here is the canonical silent-data-path break in ## debug layer 4.

5. Only after steps 2-4 read clean may the agent admit the rest of the host application fleet onto the relay. The fleet admit is one client at a time on a HIGH-STAKES relay (per CAPABILITIES.md ## Safety policy); batching the fleet onto a freshly-bound relay makes failure attribution much harder. In production, the regression-baseline gate in ## test must also pass. If no no-relay baseline is feasible, do not admit the fleet on a one-sided liveness result alone: record the missing evidence and require the operator/owner to choose and approve a substitute regression oracle or explicitly accept the residual risk.

6. Stop in reverse order. Drain or stop the host application clients first; only then tear down the relay; only then tear down the DPU-side terminator. Tearing the relay or terminator down while the host application is connected produces socket disconnects / ECONNRESET / partial-byte cross-version corruption that masks unrelated bugs in subsequent runs.

When recording the run for downstream consumers (the baseline pattern), write down: the DOCA version (per doca-version TASKS.md ## configure (doca-version/TASKS.md#configure)), the deployment shape, the side(s) the relay runs on, the socket type / protocol the relay binds, the forwarding endpoint the relay points at, and the full unredacted relay-side / host-side / DPU-side captures from step 4. The downstream ## test and ## debug workflows depend on those six fields.

test

The Socket Relay's ## test verb is about testing the bridge, not unit-testing the relay binary. The bench-style measurement story belongs to doca-bench/SKILL.md; this skill's test loop is the operational smoke that proves the relay-mediated path actually carries the host application's traffic.

## test is an iterative loop, not a one-shot pass. Every state- changing operation on the relay — a re-bind, a forwarding-endpoint repoint, a deployment-shape change, a container restart, a wrapping-app restart that triggers reconnects — re-opens the smoke. Treating it as a one-shot pass is the failure mode this loop replaces.

The smoke-before-bulk shape (three substantive checks; each is load-bearing):

1. Smoke = one round-trip. Drive a single, trivial request through the host application → relay → DPU-side terminator and confirm the reply path back. Quote all three observability surfaces named in CAPABILITIES.md ## Observability — relay-side, host-application-side, DPU-side terminator — not just the application's "it worked" impression. A one-sided pass is half the evidence; the cross-check is what closes it.

2. Topology check. Trace the path explicitly: host application → relay's host-side bind → relay's far half / DPU-side container → DPU-side terminator → reply path back to the host application. Each arrow has its own observability surface per CAPABILITIES.md ## Observability; the topology check is satisfied when every arrow shows a matching byte in / byte out event for the same round-trip. A blank observability surface on any arrow is itself a finding — the agent surfaces which arrow is dark, rather than guessing.

3. Regression baseline — the no-relay direct-host comparison. Per the safety rule in CAPABILITIES.md ## Safety policy, before admitting the host application fleet to a relay-mediated path in production, run the same trivial request against the same DPU-side peer without the relay — via the application's pre-relay socket path if it still exists, or via a direct connection to the DPU-side terminator if the deployment supports it. A relay that only works with the relay in the picture, but does not reproduce the application's pre-relay behavior, is hiding a regression that the round-trip smoke alone cannot expose. If a no-relay baseline is not feasible in the operator's environment, the agent must say so — the regression check degrades to a one-sided liveness check and the agent flags the gap. That result is not a production fleet-admission pass: require an owner-approved substitute regression oracle or explicit residual-risk acceptance rather than silently quoting the round-trip as proof of regression-freedom.

Eval-loop overlay (rows apply to every relay deployment, not just one):

The agent's rule: every state-changing action on the relay re-opens the smoke. Re-running a tweaked configuration and quoting "the round-trip came back" without re-checking the topology arrows and the no-relay baseline is exactly the failure mode this loop replaces — on a HIGH-STAKES relay the cost of that failure mode is silent data-path breakage of the entire wrapping-application fleet, not just "weird traffic".

This skill does not ship a "test fixture" or pre-recorded expected output. The expected output is install-, version-, deployment-shape-, and wrapping-application-specific; pinning one would mislead operators on a different platform / state. See SKILL.md ## What this skill deliberately does not ship.

debug

When the Socket Relay fails to bind, the host application cannot connect, the round-trip never closes, or the regression baseline disagrees with the with-relay path, walk the CAPABILITIES.md ## Error taxonomy layers in order. The shape of the diagnosis:

1. Tool-not-installed (layer 1). The relay artifact is not present on the side the operator is invoking it from — no relay binary, no relay container image, no relay subpackage. Confirm DOCA is installed on that side via doca-version TASKS.md ## configure (doca-version/TASKS.md#configure), confirm the install profile includes the relay per the public guide reached through doca-public-knowledge-map ## DOCA tools (doca-public-knowledge-map/SKILL.md#doca-tools), and apply the Socket Relay overlay in CAPABILITIES.md ## Version compatibility. Route to doca-setup ## install (doca-setup/TASKS.md#configure) if absent.

2. Relay-not-bound — port / socket layer (layer 2). The relay process / container starts but cannot bind the host-side socket / port / UDS path the operator configured. The relay's own message is ground truth; the agent quotes it verbatim rather than guessing. Re-quote the configuration from the public guide and --help on the installed binary; route filesystem / privilege issues to the host-OS team and to doca-setup CAPABILITIES.md ## Safety policy (doca-setup/CAPABILITIES.md#safety-policy); for the container-shape deployment, walk doca-container-deployment ## debug (doca-container-deployment/TASKS.md#debug) layer 5 (volume-mount) when the bind target is a host-path UDS mounted into the container.

3. Host-app-not-connecting (layer 3). The relay is bound on its configured endpoint but the host application reports it cannot reach the relay. Reconcile the application-side configuration with the relay-side bound endpoint before declaring either side broken — quote both. Common causes: the application is configured for a different socket / port / path than the relay actually bound, the application and the relay sit in different network / mount namespaces (especially with the container-shape deployment), or a host-firewall rule is dropping the connect. The right answer when the application is configured against an endpoint the relay never bound is to fix one side or the other consistently, not to bind a second relay on the application's endpoint and silently fan out.

4. DPU-side-terminator-not-reachable (layer 4) — the silent data-path break. The host application connects to the relay successfully, the relay accepts, and yet bytes never arrive at the DPU-side peer. This is the canonical high-stakes failure mode per CAPABILITIES.md ## Safety policy. The agent's diagnosis discipline:

   • Capture the relay's view (was the byte received from the host?), the BlueField-side terminator's view (was the byte delivered?), and the DPU-side peer application's view (was the byte processed?) before blaming any single layer.

   • If the DPU-side peer is a documented BlueField service container, walk doca-container-deployment ## debug (doca-container-deployment/TASKS.md#debug) to confirm the pod is Running and the ENTRYPOINT log is clean.

   • If the DPU-side peer is a comch-backed program, walk doca-comm-channel-admin TASKS.md ## debug (doca-comm-channel-admin/TASKS.md#debug) to confirm the channel side is healthy.

   • A retry of "connect again" without root-cause analysis is the wrong move; that is exactly the silent-break failure mode this layer exists to surface.

5. Permission layer (layer 5). The relay runs and accepts the configured options but reports it cannot bind the socket, open the UDS path, or join the network namespace it needs because the invoking user lacks the privileges the public guide names. The relay's own message is ground truth; the fix is to re-run with the correct privileges per the public guide and the host-OS rules, not to bypass the check. Route container-shape permission issues to doca-container-deployment ## debug (doca-container-deployment/TASKS.md#debug) layer 5.

6. Version layer (layer 6). The relay runs but its behavior disagrees with what the public guide on the screen describes — a documented flag is rejected, a documented connection-state field never appears, or the relay's --version and pkg-config --modversion doca-common disagree (partial install). Walk doca-version TASKS.md ## debug (doca-version/TASKS.md#debug) layer 2 end-to-end and apply the Socket Relay overlay in CAPABILITIES.md ## Version compatibility; for the container-shape deployment, add the third anchor per doca-container-deployment CAPABILITIES.md ## Version compatibility (doca-container-deployment/CAPABILITIES.md#version-compatibility).

7. Cross-cutting layer (layer 7). The relay is bound, the host application connects, the forwarding endpoint is verified reachable, the version four-way match passes — and the symptom remains. The cause is below the relay: kernel / driver, BlueField mode, firmware, host networking misconfiguration, or hardware. Escalate to doca-debug TASKS.md ## debug (doca-debug/TASKS.md#debug) with the captured relay-side inspection plus the host-side and DPU-side traces as evidence; do not loop on bind / unbind / restart at this layer hoping for a different outcome.

In every case: quote what the relay said, and quote both ends of the bridge. Do not paraphrase the relay's connection-state log output, do not "summarize" the round-trip into prose, do not blame one side of the bridge without quoting the other side's view. The relay sits in the data path precisely so that an inspection of both sides is feasible; collapsing it to one side wastes the inspection.

Deferred task verbs

The following verbs are out of scope for this skill but are commonly asked in the same conversations. Route them as follows so the agent does not invent guidance:

• Large-scale relay orchestration (managing many relay endpoints across a fleet of host applications and BlueField DPUs, multi-tenant fan-out, relay-aware connection routing) ⇒ out of scope here; deferred to the operator's own platform tooling. This skill teaches the per-deployment three-axis decision and the smoke-before-bulk loop, not a multi-cluster control plane. The bundle does not currently ship a fleet-orchestration skill; route platform-team conversations to the operator's existing platform.

• Writing a custom DPU-side terminator from scratch ⇒ not a relay-tool question. The DPU-side peer the relay forwards to is its own program, written against the matching DOCA library — doca-comch/SKILL.md when the operator wants programmatic control over the host ↔ DPU bridge, or doca-eth/SKILL.md when the operator needs line-rate raw packet I/O. The relay carries the bytes; the per-library skill is where the terminator's program-side lifecycle lives.

• Container packaging of the relay (image build, tag policy, static-pod authoring) ⇒ out of scope here. The container-shape deployment of the relay rides on the shared BlueField service container runtime documented in doca-container-deployment/SKILL.md; the pod-spec shape, image-pull procedure, static-pod manifests directory, and per-service config-file mount are owned by that skill. This skill names that the container shape is one of the three documented deployment shapes; the runtime contract belongs there.

• Installing DOCA on the host or BlueField target ⇒ out of scope here. Route to doca-setup ## install (doca-setup/TASKS.md#configure) (and doca-setup ## no-install (doca-setup/TASKS.md#no-install) for the public NGC DOCA container path). The relay is shipped by the install; this skill does not own the install workflow.

• General host ↔ DPU control-plane programming ⇒ not a relay-tool question. Route to doca-comch/SKILL.md and to doca-comm-channel-admin/SKILL.md for the operator-side admin pattern on the comch side.

Command appendix

Socket Relay-specific invocation classes the verbs above reach for. Every row is a CLASS — the agent must not invent binary names, flag strings, subcommand names, socket-path defaults, port numbers, or output column names beyond what the public DOCA Socket Relay guide and --help on the installed artifact document. The read-only-first / state-changing-after-smoke symmetry is the load-bearing piece.

Infra-aware preamble (every row below). Per the bundle's detect → prefer → fall back → report contract documented in doca-structured-tools-contract ## The agent behavior contract (doca-structured-tools-contract/SKILL.md#the-agent-behavior-contract), the agent should:

1. Probe for the matching structured helper FIRST (doca-env --json for version + devices + libraries + drivers + hugepages in one shot; doca-capability-snapshot for per-device capability flags; version-matrix.json for "available since" lookups).

2. If the probe succeeds, the structured tool's output is the authoritative answer and the agent SHOULD NOT also run the manual command in the row below. Report "using structured <tool>".

3. If the probe fails, fall back to the manual command in the row. Report "falling back to manual chain".

4. The schemas the structured tools emit are defined in doca-structured-tools-contract ## Schemas (doca-structured-tools-contract/SKILL.md#schemas); the version-handling semantics (four-way match, NGC, headers-win) are owned by doca-version/SKILL.md.

Three cross-cutting rules for this appendix:

• Never invent a binary name, flag string, subcommand name, socket-path default, port number, or output column name. --help on the installed artifact plus the public DOCA Socket Relay guide via doca-public-knowledge-map ## DOCA tools (doca-public-knowledge-map/SKILL.md#doca-tools) are the joint contract; prose-derived strings are the most common hallucination failure for this skill.

• State-changing operations re-open the smoke. A re-bind, a forwarding-endpoint repoint, a deployment-shape change, a container restart — each is HIGH-STAKES per CAPABILITIES.md ## Safety policy and re-opens the ## test round-trip + topology + regression-baseline loop.

• Cross-link instead of duplicate. Cross-cutting commands (pkg-config --modversion, dmesg, mlxconfig -d <bdf> q, representor enumeration, port state) live in doca-debug TASKS.md ## Command appendix (doca-debug/TASKS.md#command-appendix) and doca-setup TASKS.md ## Command appendix (doca-setup/TASKS.md#command-appendix); the container-shape deployment runtime commands live in doca-container-deployment TASKS.md ## Command appendix (doca-container-deployment/TASKS.md#command-appendix); this appendix names only Socket Relay-specific invocations on top.

Cross-cutting

A few rules that apply across every verb in this file, restated here so they are visible at the point of action and not buried in SKILL.md:

• The public DOCA Socket Relay guide plus the installed --help are the joint source of truth. When they disagree (e.g. a flag landed in a release this skill was not written against), the installed --help wins for the operator's actual run.

• Read-only operations are safe; state-changing operations are not. The agent must say which class an operation belongs to before recommending it, and must gate every state-changing operation on a clean round-trip + topology + regression-baseline smoke per ## test.

• A misconfigured forwarding endpoint silently breaks app connectivity. This is the canonical high-stakes failure mode per CAPABILITIES.md ## Safety policy; the agent surfaces it explicitly before any forwarding-endpoint change.

• Quote what the relay said, both ends of the bridge. The three-view artifact bundle (relay-side, host-application-side, DPU-side terminator) is the unit a relay finding is meaningful in; paraphrasing or summarizing loses fidelity the rest of the bundle's procedures depend on.

• This skill assumes a healthy DOCA install on the side the relay runs (or the public NGC DOCA container) and whatever privileges the public guide names for the chosen deployment shape. If the install is in doubt, route to doca-setup/SKILL.md before running anything else here. For the host ↔ DPU control-plane sibling whose channels coordinate the endpoints the relay carries traffic between, see doca-comch/SKILL.md and its operator-side admin counterpart doca-comm-channel-admin/SKILL.md.