Doca Spcx Cc

DOCA SPCX Congestion-Control Tool — Tasks

Where to start: The verbs that carry real workflow content are ## install (host-side DOCA + DPA + firmware slot prerequisites), ## configure (the SPCX-vs-PCC decision tree + role + algorithm + parameters + probe- packet format), ## run (the prepare → smoke → contention-positive evaluation flow), ## test (iterative loop on the replica), ## debug (layered diagnosis), and ## use (the "safe to roll forward" decision with evidence + rollback + escalation). The two routing-stub verbs (build, modify) are kept because the agent's task-verb contract is uniform across the bundle and each carries a meaningful pointer to where the user's question actually belongs.

This file is loaded by SKILL.md after CAPABILITIES.md. It walks the agent through the documented invocations of doca_spcx_cc, the replica-first evaluation discipline, and the hand-off to the production roll-forward gate that the bundle-wide hardware-safety meta-policy gates.

install

doca_spcx_cc is shipped pre-built as part of every DOCA install that includes the SPCX optional component, under /opt/mellanox/doca/tools/. The operator-side install path:

1. Confirm DOCA is installed with the SPCX component. If the binary is missing, route to doca-setup ## install (doca-setup/TASKS.md#configure) to install or repair the host-side DOCA package selection; confirm the version per doca-version TASKS.md ## configure (doca-version/TASKS.md#configure).

2. Confirm the host-side doca-pcc/SKILL.md library is installed at the matching version. The SPCX tool links this library; the two must come from the same DOCA release band per CAPABILITIES.md ## Version compatibility.

3. Confirm the DPACC compiler is installed and version-matched. Per the doca-dpa/SKILL.md overlay, the DPA-side algorithm image is built by DPACC and the host-side DOCA must match DPACC.

4. Confirm a BlueField with a DPA processor is physically present and visible to the host through DOCA. Walk doca-dpa TASKS.md ## configure (doca-dpa/TASKS.md#configure) step 1 to enumerate the device.

5. Confirm the firmware custom-PCC slot is enabled. Per doca-pcc CAPABILITIES.md ## Capabilities and modes (doca-pcc/CAPABILITIES.md#capabilities-and-modes) triple-axis precondition: custom-PCC requires a firmware-level slot to be enabled via the mlxconfig-class knob the DOCA PCC guide names. If the slot is disabled, the SPCX session will fail with the firmware-precondition error layer. The slot flip is a hardware-touching change per the bundle-wide hardware-safety meta-policy in doca-hardware-safety CAPABILITIES.md ## Safety policy (doca-hardware-safety/CAPABILITIES.md#safety-policy) — capture the pre-flight inventory, confirm OOB, and follow the cold-power-cycle commit rule.

6. Confirm SPCX availability on the installed DOCA + BlueField generation. SPCX is the newer of the two programmable-CC surfaces; the DOCA release notes name the supported combinations. The agent does NOT assume SPCX is available — the gate is doca_spcx_cc --help succeeding on the installed binary + the DOCA release notes naming the user's setup.

7. Confirm a non-prod RDMA / RoCE fabric with controllable contention is reachable for the evaluation flow in ## test. Without contention there is no signal to evaluate against.

8. Confirm the operator has the privileges the DOCA release notes require for binding the device, loading the algorithm image, and writing the captured artifacts.

If the binary is not at the standard path, the fix is to install / repair the host-side DOCA package selection that includes the SPCX component, not to patch the file in place.

configure

The tool's configuration is the invocation + the loaded DPA-side algorithm image. Steps the agent walks the user through, in order:

1. Gate — pick the right programmable-CC surface. Walk the SPCX-vs-PCC-vs-factory-firmware decision tree in CAPABILITIES.md ## Capabilities and modes. If the user wants a documented default algorithm, route to firmware configuration; if the user wants the established PCC surface, route to doca-pcc/SKILL.md; only commit to SPCX when the install + algorithm + BlueField combination supports it AND the user accepts the newer-surface tradeoff.

2. Confirm the live-link / contention precondition. The fabric the tool will exercise must be live, carry RDMA / RoCE traffic, and have contention that matches the algorithm's design. Document the contention shape explicitly; an unstated contention pattern means the run is uninformative per CAPABILITIES.md ## Capabilities and modes live-link rule.

3. Source the DPA-side algorithm. Either build the user-authored algorithm via DPACC (walk the public DOCA SPCX / DOCA PCC programming guides via doca-public-knowledge-map/SKILL.md for the algorithm-side discipline) or stage the documented shipped reference per the ZTR-RTT CC documentation via doca-public-knowledge-map. Pin a SHA + version of the algorithm image; the evaluation evidence depends on this.

4. Pick the role. The role decision (RP — Reaction Point — vs NP — Notification Point) is a deployment-shape choice the user makes per-endpoint. The shipped doca_spcx_cc binary runs as RP and registers no --role CLI flag (--help first to confirm the actual registered flag set on that DOCA release; do NOT quote a --role flag the binary does not expose). The two endpoints of the deployment must still agree on the role assignment; quote the assignment back to the user so they can challenge it.

5. Pick the probe-packet format. --probe-packet- format (e.g. CCMAD per the public default — re- confirm the exact token against --help). Both ends of the deployment must agree on the format.

6. Stage the parameters. Each algorithm exposes a parameter set; the parameters live in the algorithm documentation, not in this skill. For a user-authored algorithm, resolve the applicable the public DOCA PCC programming guide through doca-public-knowledge-map/SKILL.md and validate every name/range there. For the shipped zero-touch RTT reference, use the ZTR-RTT CC documentation via doca-public-knowledge-map. If no authoritative range is available, stop rather than invent one. Pin the parameter set in writing; the parameter set is part of the evaluation evidence tuple per CAPABILITIES.md ## Observability.

7. Plan thread count + core list. Per the shipped sample (the host-side doca-pcc defaults), the session uses a thread count + a per-thread core list. The agent does not invent the defaults; the shipped sample + --help on the installed binary are the authoritative source.

8. Stage the capture surface. Decide where the per-port / per-flow tracer output goes, and pair it with a planned read of doca-pcc-counters/SKILL.md snapshots before / during / after the evaluation.

For the canonical DOCA universal lifecycle on the host-side PCC library this tool drives, see doca-pcc TASKS.md ## configure (doca-pcc/TASKS.md#configure) and doca-programming-guide TASKS.md ## configure (doca-programming-guide/TASKS.md#configure). This skill is concerned with the operator-side configuration of the SPCX harness.

build

doca_spcx_cc is shipped pre-built as part of every DOCA install that includes the SPCX optional component (/opt/mellanox/doca/tools/doca_spcx_cc). There is no source tree the external user is expected to compile for the tool itself.

The user-built half is the DPA-side algorithm image: the DPA-side translation unit the user wrote (or the shipped reference algorithm code), compiled by DPACC into an image the tool loads via the doca-pcc/SKILL.md library.

Routing for nearby "build" questions:

• "The binary isn't there — do I need to build it?" → no. Route to doca-setup ## install (doca-setup/TASKS.md#configure) to install or repair the host-side DOCA package selection that includes the SPCX component.

• "I want to build my own SPCX algorithm." → that is the DPA-side build. Route to doca-pcc TASKS.md ## build (doca-pcc/TASKS.md#build) for the cross-side build pattern + the public DOCA SPCX / DPACC guides via doca-public-knowledge-map/SKILL.md for the SPCX-specific algorithm authoring detail.

• "I want to build the shipped reference RTT-based algorithm." → route to the ZTR-RTT CC documentation via doca-public-knowledge-map for the algorithm-side discipline; the tool's harness is the same.

• "I want to extend the tool with a new mode." → out of scope here; this skill is for external operators consuming the shipped tool, not for contributors extending it.

The ## What this skill deliberately does not ship block in SKILL.md explicitly forbids adding a build recipe for the SPCX tool; revisit that policy before changing this section.

modify

Do not modify the shipped doca_spcx_cc binary. It is an NVIDIA-shipped CLI; there is no documented public way to change its behaviour, output format, or parameter surface, and none should be invented.

What the agent does modify, every time, is:

1. The tool invocation — the registered argp flags (--device, --threads, --wait-time, --probe-packet-format), the algorithm-image / DPA-resource flags exactly as --help lists them, and any capture-surface flags the binary registers. The role (RP) is NOT a runtime knob.

2. The DPA-side algorithm image — the user-authored algorithm body (rebuilt via DPACC) or the shipped reference algorithm's parameter set (the ZTR-RTT CC documentation via doca-public-knowledge-map).

That is the configuration loop in ## configure above and the iteration loop in ## test below; treat modify the invocation + algorithm, not the binary as the operating mode.

Routing for nearby "modify" questions:

• "My algorithm is mis-behaving on the live link — can I tweak it in place?" → no; tweak the source, rebuild via DPACC, re-load. The runtime is immutable.

• "I want a different observability surface than the tool exposes." → re-examine the documented observability surface in CAPABILITIES.md ## Observability; pair with doca-pcc-counters/SKILL.md and doca-rdma/SKILL.md for complementary surfaces. Patching the tool's output is out of scope.

run

The prepare → smoke → contention-positive evaluation flow — every SPCX session goes through it, no exceptions. The full invocation surface lives in the DOCA release notes; this section names the shape of the flow, not verbatim command lines (per CAPABILITIES.md ## Safety policy "do not invent flags").

Do-not-invent guard (flags vs subcommands). The doca_spcx_cc binary takes flags only — it has no subcommand surface. There is no load / start / observe / stop subcommand family for this binary. The flag inventory the bundle enumerates verbatim is --device, --threads, --wait-time, --probe-packet-format, plus algorithm-image and capture-surface flags (see ## Command appendix). The role (RP vs NP) is not registered as a CLI flag — do not quote --role against --help output that does not list it. The host-side status values reported by the bundle (Active, Standby, Deactivated, Error per CAPABILITIES.md ## Capabilities and modes) are status indicators, not subcommands.

1. Confirm prerequisites. Per ## install and ## configure: binary present, library + DPACC + firmware-slot + SPCX availability all aligned, algorithm image pinned, live-link + contention fabric reachable.

2. Capture the pre-flight inventory. Per the bundle-wide hardware-safety meta-policy (doca-hardware-safety CAPABILITIES.md ## Capabilities and modes (doca-hardware-safety/CAPABILITIES.md#capabilities-and-modes)): PCIe topology, link state, firmware level, BFB level, current CC algorithm in effect (factory or prior programmable), host-side env snapshot. This is the baseline the rollback compares against.

3. Confirm OOB management path is reachable. Per the meta-policy doca-hardware-safety CAPABILITIES.md ## Safety policy (doca-hardware-safety/CAPABILITIES.md#safety-policy) OOB rule, if the cutover touches a BlueField the operator manages over the same RDMA link the SPCX algorithm controls.

4. Smoke run — load the algorithm, briefly observe the host-side status. Run doca_spcx_cc with the chosen role + probe-packet format + algorithm image + thread / core layout for a short window. Confirm the host-side status reaches Active per CAPABILITIES.md ## Observability and the tool emits the documented start banner. If the session does not reach Active, stop and walk ## debug layer by layer.

5. Inject the planned contention pattern. The evaluation only produces signal when the fabric is contended in a way that matches the algorithm's design. Confirm via doca-pcc-counters/SKILL.md snapshots and doca-rdma/SKILL.md flow observation that the contention is real.

6. Capture per-port / per-flow runtime output. The tool's tracer-style output is the primary evidence surface; pair it with doca-pcc-counters snapshots before / during / after, and with doca-rdma-side metrics (throughput, latency, completion ordering).

7. Stop the algorithm cleanly. Send SIGINT / SIGTERM per the shipped sample's signal handling (the agent re-confirms against --help); confirm the host-side status transitions to Deactivated cleanly; capture the final tracer output.

8. Confirm post-stop state on the link. The fabric should return to the algorithm-in-effect- before state (the captured pre-flight baseline). If it does not, the rollback path is the immediate next step.

When recording the run for downstream consumers (the evaluation evidence pattern), write down: the DOCA version, the DPACC compiler version, the BlueField identity + firmware version + custom-PCC slot state, the algorithm name + SHA + version + parameter set, the role assignment per endpoint, the probe-packet format, the fabric topology + contention shape, the capture window, the tracer output, the doca-pcc-counters snapshots, and the doca-rdma metrics. The downstream ## test, ## debug, and ## use workflows depend on those fields.

test

doca_spcx_cc is a high-stakes evaluation tool, so its ## test verb is about iteratively building evidence — confirming the algorithm's behaviour is what the user expects under controlled contention, on a replica that matches production's hardware class — not unit-testing the tool itself.

## test is an iterative loop, not a one-shot pass. A single contention-positive run is the beginning of the evidence pile, not the end. Each iteration tightens one axis (parameter set, contention shape, algorithm version, observability completeness, fabric-topology match) and loops back to ## run.

The eval-loop overlay (rows apply to every SPCX session):

The agent's rule: every change to the algorithm or its parameters re-opens the loop. Re-running with a tweaked parameter set and quoting the previous captured behaviour without re-checking under the new parameter set is exactly the failure mode this loop replaces.

Loop termination: stop iterating once the captured behaviour is consistent across two consecutive runs on a production-matching replica — including hardware/firmware/kernel/topology, contention pattern, and representative workload class — AND the rollback path has been rehearsed end-to-end on the replica AND the bounded-blast-radius rollout plan is in writing.

This skill does NOT ship a "test fixture" or pre- recorded expected output. CC behaviour is fabric-, topology-, contention-, and algorithm-specific; pinning one would mislead operators on a different setup.

debug

When doca_spcx_cc fails to load, fails to reach Active, or behaves wrongly on a congested link, walk the layered error taxonomy in CAPABILITIES.md ## Error taxonomy in order. The shape of the diagnosis:

1. Install. Confirm the binary exists, the SPCX optional component is installed, and the host-side doca-pcc/SKILL.md library is present. Route to doca-setup ## install (doca-setup/TASKS.md#configure) if not.

2. Device-binding. Confirm the BlueField is visible to DOCA per doca-pcc TASKS.md ## configure (doca-pcc/TASKS.md#configure) step 1.

3. Firmware custom-PCC slot. Confirm the slot is enabled via the mlxconfig-class knob the public guide names. The slot flip is a hardware-touching change per doca-hardware-safety CAPABILITIES.md ## Safety policy (doca-hardware-safety/CAPABILITIES.md#safety-policy).

4. DPA-image. Confirm the DPA-side algorithm image was built by a DPACC version matched to the host-side DOCA per CAPABILITIES.md ## Version compatibility; re-build if not.

5. Algorithm-precondition. Confirm the parameter set is within the algorithm's documented ranges; confirm the algorithm's required probe-packet format is exposed on this install; confirm the far-side endpoint exists and has the matching role assignment.

6. Live-link / contention. Confirm contention actually exists on the fabric and that its shape matches the algorithm's design. This is the most common "my algorithm did nothing" root cause.

7. Runtime. If the algorithm is running on a congested link but the captured behaviour is wrong, capture the evidence and walk doca-pcc TASKS.md ## debug (doca-pcc/TASKS.md#debug); the rollback path is the immediate operational response — do NOT keep iterating on a production- exposed deployment.

8. Version. Walk doca-version TASKS.md ## debug (doca-version/TASKS.md#debug) end-to-end; the tool ↔ library ↔ DPACC ↔ firmware quadruple is the common version mismatch failure.

9. Cross-cutting. Cause is below DOCA — driver, firmware, BlueField mode, host kernel. Hand off to doca-debug ## debug (doca-debug/SKILL.md) and doca-setup ## debug (doca-setup/TASKS.md#debug).

In every case: quote what the tool reported. Do not paraphrase the tracer output, do not summarize the per-port / per-flow stream into a single number, and do not skip the live-link / contention layer.

use

The captured evaluation evidence is consumed by the roll-forward vs roll-back decision — the load- bearing safety gate the bundle's hardware-safety meta- policy gates. The agent's hand-off:

1. Confirm every replica-first criterion is met per CAPABILITIES.md ## Safety policy: evaluation on a replica that matches production on hardware class, contention shape matched to the algorithm's design, two consecutive runs produced consistent behaviour, rollback rehearsed end-to-end on the replica.

2. Confirm the production rollout plan is bounded. First production cutover is one BlueField pair, not the fleet. Then a small bounded set. Then progressively larger bounded sets, with the observability gate proven at each step.

3. Confirm the rollback to factory PCC is documented. The rollback names the exact action (revert the loaded algorithm, fall back to the factory PCC behaviour in firmware) and the gate that triggers it (observability surface goes silent, queue depth exceeds threshold, host-side doca-pcc status transitions to Error, fabric- level link instability).

4. Confirm OOB management path is reachable for every production endpoint the algorithm is loaded onto.

5. Confirm maintenance window discipline per doca-hardware-safety CAPABILITIES.md ## Safety policy (doca-hardware-safety/CAPABILITIES.md#safety-policy) — cutovers run inside an explicit, time-boxed window with operations notified.

6. Refuse the cutover when any gate fails. The agent surfaces the failed gate as blocking and does NOT find a creative workaround. Escalate per doca-hardware-safety CAPABILITIES.md ## Safety policy (doca-hardware-safety/CAPABILITIES.md#safety-policy) no-rollback rule.

The agent's rule: the tool evaluates; this verb gates the cutover; the doca-hardware-safety/SKILL.md meta-policy is the final authority. A "safe to roll forward" answer requires evidence + bounded plan + documented rollback + OOB + maintenance window; anything less is refused.

Deferred task verbs

The verbs below are not doca_spcx_cc work and should be routed out before the agent does any of them under this skill's name.

• DPA-side algorithm authoring detail → doca-pcc/SKILL.md + doca-dpa/SKILL.md + the the public DOCA PCC programming guide via doca-public-knowledge-map/SKILL.md. This skill is the operator-side harness; the algorithm-side discipline is owned upstream.

• Factory PCC configuration → firmware-level knobs, no host-side library or tool needed. Route via doca-public-knowledge-map/SKILL.md.

• PCC counter inspection without loading an algorithm → doca-pcc-counters/SKILL.md. The counter tool is read-only and side-effect-free; SPCX loads an algorithm.

• Raw DPA cycle profiling → different surface, different tool. Route via doca-public-knowledge-map ## DOCA tools (doca-public-knowledge-map/SKILL.md#doca-tools); this tool's tracer output is at the SPCX-runtime layer, not the DPA-instruction layer.

• RDMA library programming questions → doca-rdma/SKILL.md.

• General DOCA install / repair → doca-setup ## install (doca-setup/TASKS.md#configure).

Command appendix

doca_spcx_cc-specific invocation classes the verbs above reach for. Every row is a CLASS — the agent must not invent flags, role tokens, probe-packet format tokens, or metric names beyond --help on the installed binary and the DOCA release notes.

Infra-aware preamble (every row below). Per the bundle's detect → prefer → fall back → report contract documented in doca-structured-tools-contract ## The agent behavior contract (doca-structured-tools-contract/SKILL.md#the-agent-behavior-contract), the agent should:

1. Probe for the matching structured helper FIRST (doca-env --json for version + devices + DPA availability + custom-PCC slot state in one shot; doca-capability-snapshot for per-device capability flags).

2. If the probe succeeds, the structured tool's output is the authoritative answer.

3. If the probe fails, fall back to the manual command in the row.

4. The schemas the structured tools emit are defined in doca-structured-tools-contract ## Schemas (doca-structured-tools-contract/SKILL.md#schemas).

Three cross-cutting rules for this appendix:

• Never invent a flag, role token, probe-packet format token, algorithm parameter name, or metric name. --help on the installed binary and the DOCA release notes are the joint contract.

• Smoke before contention, contention before conclusion. Every row above presumes the smoke reached Active first AND the contention precondition was met. Drawing a conclusion from either step in isolation is the canonical SPCX evaluation failure.

• Cross-link instead of duplicate. Cross-cutting commands (pkg-config --modversion doca-pcc, doca_caps --list-devs, mlxconfig -d <bdf> q for the custom-PCC slot state) live in doca-debug ## debug (doca-debug/SKILL.md) and doca-setup TASKS.md ## debug (doca-setup/TASKS.md#debug); this appendix names only doca_spcx_cc-specific invocation classes.

Cross-cutting

A few rules that apply across every verb in this file, restated here so they are visible at the point of action and not buried in SKILL.md:

• The DOCA release notes plus the installed --help are the joint source of truth. When they disagree, the installed --help wins for the user's actual run.

• A CC algorithm has no signal under no contention. The agent refuses to declare an algorithm safe based on an idle-link or contention-absent run.

• Replica-first is mandatory. No production cutover without a contention-positive evaluation on a hardware-matched replica and a rehearsed rollback.

• Factory-PCC rollback is the always-available escape hatch. Every deployment plan names it explicitly; a plan without it is refused per the bundle-wide hardware-safety meta-policy.

• Quote the (DOCA + DPACC + BlueField + firmware + algorithm SHA + parameter set + role + probe-packet format + fabric topology + contention shape + window) tuple. Evidence without the tuple is unreplicable.

• This skill assumes a healthy DOCA install with the SPCX component, a paired doca-pcc/SKILL.md library

  • DPACC, a BlueField with a visible DPA and the firmware custom-PCC slot enabled, and a contention-positive replica fabric. If any of those is in doubt, route to doca-setup/SKILL.md, doca-pcc/SKILL.md, or doca-hardware-safety/SKILL.md before running anything else here.