Doca Common

DOCA Common capabilities, subsystems, version overlay, errors, observability, safety

Where to start: This file is the substance of the doca-common foundation. Five subsystems live here as their own H2 anchors — ## log, ## buf, ## ctx, ## dev, ## progress engine — each corresponds to a public-header family under $(pkg-config --variable=includedir doca-common) and to a verb-side workflow in TASKS.md. The opening ## Capabilities and modes is the routing layer that names which subsystem owns which class of question; the closing ## Version compatibility, ## Error taxonomy, ## Observability, and ## Safety policy are the cross-subsystem overlays.

Read this file when the loader sent you here from SKILL.md. For step-by-step workflows that use these capabilities (configure / build / modify / run / test / debug / use / log) see TASKS.md. For where the underlying public documentation and installed package paths live, defer to doca-public-knowledge-map/SKILL.md — do not duplicate URLs or install paths in this file.

Pattern overview

Every doca-common question this skill teaches resolves into one of SIX patterns. The patterns are CLASSES — they apply across every DOCA app and every higher-level library, not just the worked example shown.

Two cross-cutting rules that apply to every pattern above:

• Discover the version-installed surface, do not assume. Every pattern above gates on pkg-config --modversion doca-common and on the runtime cap-query against the active doca_devinfo. Quoting a Common API symbol or a device capability without checking is the most common hallucination failure mode at the foundation layer.

• Lifecycle is universal across libraries. cfg-create → cfg-set-* → init → start → use → stop → destroy is the same shape for every DOCA Core context regardless of which library it belongs to. Skipping a stage or calling an operation outside its allowed window returns DOCA_ERROR_BAD_STATE; the right response is to re-walk the lifecycle, not to retry.

Capabilities and modes

DOCA Common is the foundation library every other DOCA library depends on. Per the DOCA Core Programming Guide, the Core surface ships the universal primitives every DOCA application touches before specializing into any higher-level library. The pkg-config module name is doca-common; it is always present on any healthy DOCA install.

DOCA 3.5 added public capability families for buffer initialization, device-as-context conversion, device link-state query, event notification, PCIe link information, DPN PCI-address mapping, and mmap creation from a memory region. The table below names each family and points to the public header that owns the exact names and signatures; constants and prototypes are not recited here.

Adjacent Common surfaces (sync events, graphs, clocks, UAR / umem, buf arrays, mmap advise) are mentioned where they touch one of the primary subsystems. The agent's rule: when the user's question lands on one of those adjacent surfaces, route to the header on the user's install and to the public DOCA Core Programming Guide for the per-surface detail rather than reciting it here.

log

DOCA Log is DOCA's standardized logging primitive. Every DOCA library (and every shipped DOCA sample and reference application) emits its own log lines through DOCA Log, so log output from a DOCA app interoperates with DOCA's centralized level controls and downstream consumers such as the DOCA Telemetry Service.

The two-tier log-level model — the single most load-bearing rule. DOCA Log carries two independent verbosity tiers, each with its own setter and its own default. The agent MUST walk this table BEFORE writing any code:

The agent's diagnostic rule: when the user reports "my log levels do nothing", the FIRST hypothesis is tier confusion (setting one tier when they meant the other) — NOT a DOCA Log bug, NOT a hardware bug, NOT a sample issue. Walk the table above before any code-side investigation.

The objects DOCA Log exposes. The public surface is small and stable. The agent must not invent additional objects; the load-bearing call shapes are the rows below.

Custom-sink writes inherit the sink's own permission envelope. When the user installs a custom backend (file, fd, buf, syslog) instead of relying on the default stderr, the writes happen under that sink's own permission rules — file permissions on the target path, fd permissions inherited from the caller, syslog ACLs on the destination. The DOCA Log API itself adds no permission elevation; the user must ensure the process has whatever rights the sink needs. A sink whose creation succeeds but whose writes fail is the worst kind of "my log lines disappear" symptom — see ## Safety policy.

Path-selection — DOCA Log vs language-native logging. DOCA Log is not the only logging framework available; the agent must walk this rule before recommending DOCA Log setup. In a DOCA-app context (any codebase that calls doca_*), DOCA Log is the right primitive because its output interoperates with --sdk-log-level and with the downstream consumers such as the DOCA Telemetry Service. In a non-DOCA codebase with no DOCA-side context, language-native logging (printf, fprintf(stderr, …), syslog, spdlog, Python logging, Rust tracing, …) is fine. The anti-pattern alert: silently swapping a sample's DOCA_LOG_* calls for printf for simplicity is a wrong answer — it severs interop with --sdk-log-level and the downstream consumers, and makes the modified sample look unlike every other DOCA artifact on the host.

For the verb-side workflow (configure / build / modify / run / test / debug a DOCA Log integration), see TASKS.md ## log.

buf

DOCA's zero-copy data plane rests on three objects layered together:

DOCA 3.5 adds direct buffer initialization: doca_buf_get_struct_size returns the size to allocate for a struct doca_buf, and doca_buf_init initializes that memory over a head pointer and size. It also adds doca_mmap_create_from_mr to create a doca_mmap from an existing memory region (remote_addr, length, rkey, access_flags) on a device. Developers must use these constructors instead of assuming struct layout or manual initialization; see the public header for exact signatures.

The doca_buf_pool surface (allocate-by-pool variant) and the doca_buf_array surface (DPA / GPU-targetable buffer arrays) are adjacent flavors of the same model. The buf-chain primitives (doca_buf_chain_list, doca_buf_get_next_in_list, doca_buf_unchain_list) let the user assemble scatter-gather lists without copying.

The same buf flows between libraries. A doca_buf allocated by inventory A can be referenced by doca_dma on the source side and doca_rdma on the destination side — both contexts see the same underlying registered memory through the same handle. That is the load-bearing property zero-copy buys: a single doca_mmap registers once, the inventory carves it into N doca_bufs, and each doca_buf crosses library boundaries without a second registration or a copy.

Permissions and exports. doca_mmap_set_permissions gates PCI_READ vs PCI_READ_WRITE vs LOCAL_READ_WRITE; the matching cap-query family (e.g. doca_mmap_cap_is_export_pci_supported) tells the agent whether the device supports the export class the user wants. Exports flow through doca_mmap_export_pci / _export_rdma, and the importing side uses doca_mmap_create_from_export to rebuild the handle.

Lifecycle order is load-bearing. Destroying an mmap while a buf from its inventory is still in flight returns DOCA_ERROR_BAD_STATE; destroying a doca_dev while an mmap is still registered on it returns the same. The teardown order is the canonical dependency order: drain outstanding tasks → stop contexts → destroy library contexts → stop and destroy inventories → stop and destroy mmaps → destroy progress engines → close devices → destroy devinfo lists. See TASKS.md ## use for the worked buffer-lifecycle walk.

For the verb-side workflow (configuring buffers, modifying a sample's buffer wiring), see TASKS.md ## configure and TASKS.md ## use.

ctx

doca_ctx is the universal context handle every per-library doca_*_create returns. A doca_flow_port, a doca_rdma, a doca_eth_txq, a doca_dma, a doca_comch_server — every one carries an underlying doca_ctx that the user manipulates through the universal lifecycle calls.

The lifecycle every DOCA Core context follows:

1. Create. Library-specific doca_<library>_create(...) returns a handle from which doca_<library>_as_ctx() (where exposed) or the library's own ctx accessor surfaces the underlying doca_ctx *. Some libraries expose the doca_ctx * directly; the shape is the same. For a doca_dev, use the DOCA 3.5 device-to-context conversion function doca_dev_as_ctx(dev) to obtain the underlying doca_ctx *; do not cast or assume a doca_dev is a doca_ctx. See the public header for the exact signature.

2. Configure. Library-specific *_set_* setters apply BEFORE doca_ctx_start. Once started, most setters return DOCA_ERROR_BAD_STATE.

3. Connect to a progress engine. doca_pe_connect_ctx(pe, ctx) registers the context with a PE so its task completions surface through doca_pe_progress. Skipping this step is the canonical "tasks submit but nothing completes" failure mode (see ## progress engine).

4. Start. doca_ctx_start(ctx) transitions to RUNNING. The library-specific use calls (doca_<library>_task_*_submit, …) only make sense in the RUNNING state.

5. Use. Submit tasks, drain completions through the PE.

6. Stop. doca_ctx_stop(ctx) transitions toward IDLE. Outstanding tasks must be flushed first via doca_ctx_flush_tasks or by draining the PE until doca_ctx_get_num_inflight_tasks reads 0.

7. Destroy. The library-specific doca_<library>_destroy(...) releases the context. Destroying before stop returns DOCA_ERROR_BAD_STATE.

State-change callbacks. doca_ctx_set_state_changed_cb lets the user observe lifecycle transitions; doca_ctx_get_state queries the current state synchronously. Both are advisory — the lifecycle order is the contract.

User data. doca_ctx_set_user_data / _get_user_data attaches an opaque cookie to the context so completion callbacks can find their owning state without a global map.

Datapath placement. doca_ctx_set_datapath_on_gpu and _set_datapath_on_dpa are experimental setters that move a context's datapath to a GPU or DPA target instead of the host CPU. The cap side (doca_ctx_cap_get_num_completion_vectors, doca_ctx_set_completion_vector) lets the user pick a completion vector for multi-queue workloads.

For the verb-side walk of the lifecycle, see TASKS.md ## configure and TASKS.md ## run.

dev

doca_dev is the device handle every per-library context consumes. Discovery is two-step: enumerate available devices through doca_devinfo_create_list, then open the one the user wants with doca_dev_open.

The discovery model:

Capability discovery — the runtime-authority rule. The doca_devinfo carries a family of capability queries — both the generic ones (doca_devinfo_cap_is_hotplug_manager_supported, doca_devinfo_cap_is_accelerate_resource_reclaim_supported, doca_devinfo_cap_is_notification_moderation_supported, …) and the library-specific ones every higher-level skill cross-links to here (doca_flow_cap_*, doca_rdma_cap_*, doca_eth_cap_*, doca_dma_cap_*, …). The agent's rule: **the cap-query against the active doca_devinfo is the runtime authority for what the device

• firmware + DOCA version actually supports.** The public docs are the promise; the cap-query is the reality. Quoting a feature without running the cap-query is the most common foundation-layer hallucination.

Representors are how the host sees DPU-side functions. On a BlueField host with the DPU in switch mode, the host program opens the host-side PF (doca_dev_open(devinfo)) and then enumerates representors of the DPU-side VFs / SFs through doca_devinfo_rep_create_list. The representor handle is what the host program passes to doca_flow actions, doca_eth queues, etc., when steering traffic to a specific DPU-side function. The representor-side capability queries (doca_devinfo_rep_cap_is_filter_*_supported, doca_devinfo_rep_get_is_uplink_representor) tell the agent what kind of representor it is and what filters can apply.

Device-class properties. doca_devinfo_get_pci_addr_str, _get_ibdev_name, _get_iface_name, _get_mac_addr, _get_ipv4_addr, _get_ipv6_addr, _get_lid, _get_active_rate (experimental), _get_pci_func_type (experimental) are the load-bearing identifiers when the user is disambiguating among multiple devices on the host. The agent should quote these from the user's running doca_devinfo_create_list, never from memory.

Link up/down events (DOCA 3.5). A device can deliver asynchronous link-up/link-down notifications from the DOCA_DEV_EVENT_TYPE_* family, surfaced through doca_pe_progress; gate on doca_devinfo_cap_is_event_notification_supported rather than polling link state.

DOCA 3.5 adds doca_dev_get_link_state for polling the current link state, with the DOCA_DEV_LINK_STATE_* family. Asynchronous notifications use doca_dev_register_event_notification and doca_dev_unregister_event_notification; supported event types are the DOCA_DEV_EVENT_TYPE_* family, and the capability query is doca_devinfo_cap_is_event_notification_supported. Notifications surface through doca_pe_progress.

PCIe link properties (DOCA 3.5). doca_devinfo_pcie_link_get_num, doca_devinfo_pcie_link_get_indices, doca_devinfo_pcie_link_get_controller, doca_devinfo_pcie_link_get_speed, doca_devinfo_pcie_link_get_width, doca_devinfo_pcie_link_is_dpu, and doca_devinfo_pcie_link_is_socket_direct query PCIe link attributes by pcie_index. Speed values use the DOCA_DEVINFO_PCIE_LINK_SPEED_* family; width values use the DOCA_DEVINFO_PCIE_LINK_WIDTH_* family. See the public header for exact names and signatures.

DPN mapping (DOCA 3.5). doca_dpn_cap_is_map_pci_addr_to_dpn_supported checks whether a doca_devinfo supports mapping a PCI address to a DPN ID; doca_dpn_map_pci_addr_to_dpn_id performs the mapping.

Buffer and memory-region helpers (DOCA 3.5). doca_buf_get_struct_size and doca_buf_init initialize a doca_buf; doca_mmap_create_from_mr creates a doca_mmap from a memory region. doca_dev_as_ctx returns the device's struct doca_ctx *.

DOCA 3.5 developer guidance. Developers must use the new getter functions with the corresponding constant families (DOCA_DEV_LINK_STATE_*, DOCA_DEV_EVENT_TYPE_*, DOCA_DEVINFO_PCIE_LINK_SPEED_*, DOCA_DEVINFO_PCIE_LINK_WIDTH_*) instead of hard-coded values; see the public header for exact names and signatures.

For the verb-side device-discovery walk, see TASKS.md ## configure and TASKS.md ## use.

progress engine

doca_pe is the universal task-completion drain every DOCA Core context relies on. Without it, tasks submitted into a context look like they vanish — they completed at the hardware, but the completion event has nowhere to surface. Driving the PE on every loop iteration is the canonical run-loop shape for every DOCA library.

The PE model:

The single rule. Every iteration of the user's main loop calls doca_pe_progress(pe). The function returns the number of completions serviced this iteration; a return of zero is fine and just means nothing was ready. Skipping the PE drive is the universal "my program does nothing" symptom. It applies regardless of which library the user's primary work is in (Flow / RDMA / Eth / DMA / Comch / …).

One PE per thread is the default shape. Sharing a PE across threads requires the user's own synchronization; the simpler shape is one PE per worker thread, with all contexts that need to complete on that worker connected to that worker's PE. Multi-PE designs are valid (e.g., one PE per CPU core in a many-core data plane) but the user picks the shape; the agent does not invent multi-PE topologies.

Inflight bookkeeping. doca_pe_get_num_inflight_tasks(pe) and the per-ctx doca_ctx_get_num_inflight_tasks(ctx) are the way to drain on shutdown — call doca_ctx_flush_tasks (or stop the ctx) and then loop doca_pe_progress(pe) until the count is zero before destroying.

Notification mode. doca_pe_set_event_mode (experimental) + doca_pe_get_notification_handle + doca_pe_request_notification let the run loop sleep on an fd instead of busy-polling. The classic poll loop is while (running) doca_pe_progress(pe); — fine for a data-plane thread, wasteful for a control-plane thread, which should prefer the notification handle.

For the verb-side walk (configuring the PE, running the drive loop, debugging missing completions), see TASKS.md ## run and TASKS.md ## debug.

Version compatibility

For the canonical DOCA version-detection chain, the four-way match rule, NGC container semantics, and the headers-win-over-docs rule, see doca-version/SKILL.md. The body lives there; this skill does not duplicate it.

The doca-common-specific overlay is:

• pkg-config --modversion doca-common is the universal DOCA install anchor. It is published by every healthy DOCA install regardless of which higher-level libraries are also installed. Per doca-version CAPABILITIES.md ## Version compatibility (doca-version/CAPABILITIES.md#version-compatibility), it joins the four-way match against doca_caps --version, cat /opt/mellanox/doca/applications/VERSION, and the BFB anchor (where applicable). When the pkg-config query for doca-common fails, the install is broken — that is a doca-setup/SKILL.md concern, not a Common concern.

• The set of doca_* symbols available is observable from the Common header set. Per the headers-win-over-docs rule in doca-version/SKILL.md, the headers under the include directory reported by pkg-config --variable=includedir doca-common (doca_buf.h, doca_ctx.h, doca_dev.h, doca_pe.h, doca_log.h, doca_mmap.h, …) are the authoritative truth for what the built library exposes. When the user reports an undefined reference for a Common symbol, the first hypothesis is wrong-version documentation — confirm the installed version, then verify the symbol exists in the installed headers, then read the matching release notes.

• Common-side experimental markers. The Common ABI splits into a stable set (symbols exported under the DOCA_2 version node, see readelf -V — doca_buf_*, doca_ctx_*, doca_dev_*, doca_pe_*, doca_mmap_*, doca_devinfo_*) and an experimental set (doca_log_*, doca_graph_*, doca_sync_event_*, doca_clock_*, doca_uar_*, doca_umem_*, doca_buf_arr_*, doca_mmap_advise_*, several newer doca_ctx_* and doca_devinfo_* extensions). The experimental markers are release-specific; the agent must read the installed doca_common.h family on the user's install before claiming experimental-tier surface is available.

• No standalone doca-log.pc in this contract. On this DOCA version the log subsystem is exposed through the doca-common pkg-config module (its public headers live under the same include root as the rest of the Common surface, resolved via pkg-config --variable=includedir doca-common). The agent's probe rule is to pkg-config --exists doca-common first; if a release exposes a standalone doca-log.pc, probe that too and report which is present. The build line is whichever the probe found.

• DOCA 3.5 public API additions. DOCA 3.5 added the following Common functions and constants. On a DOCA 3.5 install these are part of the public surface; on older installs they are absent, so an undefined reference to one of them is expected unless the installed version is 3.5 or newer. Functions: doca_buf_get_struct_size, doca_buf_init, doca_dev_as_ctx, doca_dev_get_link_state, doca_dev_register_event_notification, doca_dev_unregister_event_notification, doca_devinfo_cap_is_event_notification_supported, doca_devinfo_pcie_link_get_controller, doca_devinfo_pcie_link_get_indices, doca_devinfo_pcie_link_get_num, doca_devinfo_pcie_link_get_speed, doca_devinfo_pcie_link_get_width, doca_devinfo_pcie_link_is_dpu, doca_devinfo_pcie_link_is_socket_direct, doca_dpn_cap_is_map_pci_addr_to_dpn_supported, doca_dpn_map_pci_addr_to_dpn_id, doca_mmap_create_from_mr. Constants: DOCA_DEVINFO_PCIE_LINK_SPEED_16_GT, DOCA_DEVINFO_PCIE_LINK_SPEED_2_5_GT, DOCA_DEVINFO_PCIE_LINK_SPEED_32_GT, DOCA_DEVINFO_PCIE_LINK_SPEED_5_GT, DOCA_DEVINFO_PCIE_LINK_SPEED_64_GT, DOCA_DEVINFO_PCIE_LINK_SPEED_8_GT, DOCA_DEVINFO_PCIE_LINK_SPEED_UNKNOWN, DOCA_DEVINFO_PCIE_LINK_WIDTH_UNKNOWN, DOCA_DEVINFO_PCIE_LINK_WIDTH_X1, DOCA_DEVINFO_PCIE_LINK_WIDTH_X16, DOCA_DEVINFO_PCIE_LINK_WIDTH_X2, DOCA_DEVINFO_PCIE_LINK_WIDTH_X4, DOCA_DEVINFO_PCIE_LINK_WIDTH_X8, DOCA_DEV_EVENT_TYPE_LINK_DOWN, DOCA_DEV_EVENT_TYPE_LINK_UP, DOCA_DEV_LINK_STATE_DOWN, DOCA_DEV_LINK_STATE_UP.

Version-specific tables of symbol availability are deliberately not maintained in this file except for the DOCA 3.5 additions recorded above — they would drift out of date silently. The discipline is "read the headers and the matching release notes", not "trust this file's table".

Error taxonomy

The cross-library DOCA_ERROR_* taxonomy (what each family means and which debug layer it routes to) lives in doca-programming-guide CAPABILITIES.md ## Error taxonomy (doca-programming-guide/CAPABILITIES.md#error-taxonomy). The Common-specific overlay names the families the agent will see most often from doca_buf_* / doca_ctx_* / doca_dev_* / doca_pe_* / doca_mmap_* / doca_log_* calls and what they specifically indicate at the foundation layer:

The agent's rule: never recommend a retry loop on DOCA_ERROR_* from a Common call without first identifying which row above is the cause. Retrying masks the bug; lifecycle and capability errors do not become success on retry.

Quote doca_error_get_descr() verbatim — do not paraphrase. The cross-cutting debug ladder (doca-debug ## debug (doca-debug/TASKS.md#debug)) is the canonical layered diagnosis path that the agent escalates to once the Common-specific cause has been narrowed.

Observability

DOCA Common is the observability foundation every higher-level library builds on. The agent's job in any DOCA session is to know which observable surfaces Common exposes and which downstream consumers can read them.

Downstream consumers. DOCA Log output can be consumed downstream, for example by the DOCA Telemetry Service (per doca-public-knowledge-map/SKILL.md): when the user pipes / forwards their app's stderr (or routes through a custom backend), those services can consume the lines without any in-app wiring. This is part of why DOCA Log is preferable to printf in a DOCA-app context — the downstream shape is the same as every other DOCA artifact on the host.

Cross-link to the cross-cutting debug ladder. The verbosity-escalation surface is owned by ## log (the two-tier model). The layered debug ladder the Common observability surface feeds into is owned by doca-debug CAPABILITIES.md ## Observability (doca-debug/CAPABILITIES.md#observability) — which calls back here for the two-tier mechanics, the PE drive loop, and the inflight-task drain on shutdown.

Safety policy

Overlay on the bundle-wide hardware-safety meta-policy. The rules below are this skill's per-artifact overlay on the cross-cutting rules in doca-hardware-safety CAPABILITIES.md ## Safety policy (doca-hardware-safety/CAPABILITIES.md#safety-policy) (specifically ### Per-artifact overlay pattern (doca-hardware-safety/CAPABILITIES.md#per-artifact-overlay-pattern)). When the two layers disagree, the stricter wins; when either layer says STOP, the agent stops.

DOCA Common's per-artifact safety surface is the disciplined lifecycle ordering every higher-level library inherits, plus the log-side guardrails the rest of the bundle relies on.

• Lifecycle order is the contract for every context. Skipping doca_pe_connect_ctx before doca_ctx_start, destroying a doca_mmap while a doca_buf from its inventory is still in flight, destroying a doca_dev while a context is still using it, or calling doca_ctx_destroy before doca_ctx_stop is the canonical "the program crashes far from the offending line" failure mode. The agent's response is always to walk the lifecycle in ## ctx / ## buf / ## progress engine, not to retry. The ordering is a property of the library; ignoring it is a user-visible regression dressed up as a stack trace.

• Capability-query before action. Per ## dev, the cap-query against the active doca_devinfo is the runtime authority. Quoting a feature from documentation prose without running the cap-query is the most common foundation-layer hallucination. The cost is real: a NOT_SUPPORTED at runtime surfaces far from the place the assumption was made and wastes debug budget.

• Custom-sink writes inherit the sink's own permission envelope. When the user installs a custom log backend (file / fd / buf / syslog) instead of relying on the default stderr, the writes happen under that sink's own permission rules — file permissions on the target path, fd permissions inherited from the caller, syslog ACLs on the destination. The DOCA Log API itself adds no permission elevation; the user must ensure the process has whatever rights the sink needs. Validate the sink with a small write at registration time, before any production traffic.

• Do not log secrets through DOCA_LOG_*. Format strings passed to DOCA_LOG_* macros take printf-style varargs; there is no automatic redaction. Anything the user passes becomes part of the line and may be forwarded downstream, for example to the DOCA Telemetry Service. Treat DOCA_LOG_* as a public-equivalent emission surface and apply the user's normal redaction discipline at the call site, not inside the library.

• One PE per thread is the default; cross-thread PE sharing requires the user's synchronization. Calling doca_pe_progress(pe) from two threads on the same PE without synchronization produces interleaved completion delivery and occasional double-drain. The agent's default is to recommend one PE per worker thread; multi-PE topologies are valid but the user must own the synchronization model.

• No mixing of doca_buf handles across inventories of different doca_mmaps. A doca_buf belongs to exactly one doca_buf_inventory, which in turn was created over exactly one set of started doca_mmap ranges. Passing a doca_buf from inventory A to a context that only knows inventory B is unsupported; the visible symptom is DOCA_ERROR_INVALID_VALUE at submit time or silent data corruption. The agent's first response to "can I share a buf across inventories?" is no — re-register the memory in the second inventory or use the cross-context buf flow described in ## buf.

The agent's job is to enforce these orderings and discipline in the workflow, not just describe them. When the user says "skip the lifecycle, just call the API", the right answer is to refuse and explain the cost, not to comply.