AWS Cloudformation

Troubleshoot CloudFormation Deployment

Overview

Deterministic procedure for diagnosing a CloudFormation stack deployment failure. Pulls the stack status, failed events, and a filtered CloudTrail time window, then matches evidence against known failure patterns to produce a prioritized root cause and template-level fix.

Parameters

• stack_name (required): The name or ARN of the failed CloudFormation stack. Accept the ARN if the stack has been deleted so the user can still investigate via StackId.

• region (required): AWS region where the stack was deployed (e.g., us-east-1).

• include_cloudtrail (optional, default: "true"): Whether to correlate with CloudTrail events. Set to "false" to skip CloudTrail lookup (faster but less context).

Constraints for parameter acquisition:

• You MUST ask for all required parameters upfront in a single prompt

• You MUST support multiple input methods for the stack identifier:

  • Stack name (if the stack still exists)

  • Stack ARN (if the stack has been deleted and the user has the ARN)

• You MUST confirm the region before any API calls because CloudFormation is a regional service and calling the wrong region returns "Stack not found"

Steps

1. Verify Dependencies

Check that AWS CLI and credentials are usable, and that the principal has required read permissions.

Constraints:

• You MUST check in this order of preference:

  1. call_aws tool from the AWS MCP Server (preferred for sandboxed execution, audit logging, and observability)

  2. AWS CLI (aws) available on the user's system (verify with which aws or aws --version)

• You MUST verify the user has valid AWS credentials configured for the target region (e.g., aws sts get-caller-identity --region <region>). This read-only call is acceptable because it does not modify anything

• You MUST ONLY check for availability and credential validity. You MUST NOT install missing dependencies during this step because installation modifies the user's environment

• If the AWS CLI is missing, You MUST ask the user explicitly before running any install command, using a prompt like: "I can install the AWS CLI via <platform-specific command>. Do you want me to install it, or would you prefer to install it manually?"

• You MUST NOT run install commands without explicit user approval because this changes the user's environment

• If credentials are missing or invalid, You MUST ask the user to configure credentials and MUST NOT proceed until credentials are confirmed

• The caller MUST have at minimum: cloudformation:DescribeStacks, cloudformation:DescribeEvents, cloudtrail:LookupEvents. You SHOULD warn the user if iam:SimulatePrincipalPolicy is also unavailable because it limits how deeply you can diagnose permission-related failures

2. Get Stack Status

Fetch the current stack state.

Constraints:

• You MUST call aws cloudformation describe-stacks --stack-name <name_or_arn> --region <region>

• You MUST capture the StackStatus, StackStatusReason, LastUpdatedTime, and StackId fields

• If the stack is not found and the user provided a name, You MUST ask whether the stack may have been deleted (in which case the user needs to provide the Stack ARN)

• If the stack is in a success state (CREATE_COMPLETE, UPDATE_COMPLETE), You MUST inform the user the stack is healthy and ask whether they want to investigate a different stack or a past failure (which requires reviewing historical events)

3. Fetch Failed Events

Retrieve only the failed events using the FailedEvents filter.

Constraints:

• You MUST call aws cloudformation describe-events --stack-name <name_or_arn> --filters FailedEvents=true --region <region> because the filter returns only PROVISIONING_ERROR and VALIDATION_ERROR event types which are the relevant signals for root-cause analysis

• You MUST NOT use aws cloudformation describe-stack-events for root-cause analysis because it returns every event without filtering and buries the actual failures in noise

• You MUST capture for each failed event: LogicalResourceId, PhysicalResourceId, ResourceType, ResourceStatus, ResourceStatusReason, Timestamp, EventType

• If no failed events are returned, You MUST fall back to describe-events without the filter to find the earliest status change, because some failures surface as non-FAIL events (e.g., stuck in IN_PROGRESS)

• You MUST sort events chronologically and identify the FIRST failure, because subsequent failures are often cascading consequences of the first

• If a failed event has ResourceType: AWS::CloudFormation::Stack, You MUST recursively call describe-events --stack-name <PhysicalResourceId> --filters FailedEvents=true --region <region> to retrieve the nested stack's failed events, because the parent stack's ResourceStatusReason is generic and the actionable error is only visible in the nested stack

4. Match Failure Patterns

Compare the failure message against known patterns to propose a diagnosis.

Constraints:

• You MUST evaluate each failure message against these common patterns:

  • is not authorized to perform → IAM permission gap

  • already exists → resource name conflict

  • Invalid / does not match pattern → property validation failure

  • Rate exceeded / Throttling → API throttling

  • timed out → resource creation took too long; possibly quota or dependency issue

  • DELETE_FAILED with is not empty → stateful resource has data

  • Requested resource not found → referenced resource (AMI, KMS key, IAM role) does not exist in this region/account

  • cannot be deleted → resource has deletion protection enabled or is in use by another resource/service

• If the message matches none of the above, You SHOULD categorize it as "service-specific" and inspect ResourceType to consult the relevant service's documentation

• You SHOULD identify the FIRST failed event as the root cause candidate, because later failures are typically cascading

5. Correlate CloudTrail (Optional but Recommended)

Pull CloudTrail events in a ±60 second window around the first failure to find the underlying AWS API error.

Constraints:

• You MUST skip this step if the user set include_cloudtrail=false or if cloudtrail:LookupEvents permission is missing

• You MUST compute the time window as Timestamp - 60s to Timestamp + 60s using the first failed event's timestamp, because CloudFormation issues API calls within seconds of recording the failure

• You MUST call aws cloudtrail lookup-events --start-time <start> --end-time <end> --region <region> --max-results 50

• You MUST filter the returned events client-side to those where:

  • CloudTrailEvent.errorCode is non-empty OR CloudTrailEvent.errorMessage is non-empty

• For each matching event, You MUST extract: EventName, EventTime, errorCode, errorMessage, Username

• You SHOULD provide a CloudTrail console deeplink scoped to the failure window so the user can browse additional context:

  • Format: https://console.aws.amazon.com/cloudtrailv2/home?region=<region>#/events?StartTime=<start>&EndTime=<end>&ReadOnly=false

  • Note: Console domain varies by partition (e.g., console.amazonaws.cn for China regions, console.amazonaws-us-gov.com for GovCloud)

• If no matching CloudTrail events are found, You MUST note this and continue — not all failures produce CloudTrail-visible errors

6. Present Root Cause and Fix

Synthesize the stack event, pattern match, and CloudTrail correlation into a prioritized diagnosis.

Constraints:

• You MUST lead with the root cause of the FIRST failed event, because cascading failures often disappear once the first is fixed

• You MUST classify each fix as either:

  • Template-level (change the template, redeploy): missing required property, invalid enum, name conflict, cyclic DependsOn

  • Environment-level (fix outside the template): IAM permission, service quota, resource state

• For template-level fixes, You MUST provide the specific YAML/JSON change showing the corrected property

• For environment-level fixes, You MUST provide the specific AWS CLI command or IAM statement to apply

• You MUST NOT propose template changes for environment-level issues because that wastes cycles and does not resolve the underlying problem

• You MUST show the CloudTrail console deeplink when CloudTrail events were retrieved

• You SHOULD surface all failed events (not just the first) so the user can see cascading consequences, but clearly mark which is the root cause vs. downstream effects

7. Recommend Next Steps

Guide the user toward recovery.

Constraints:

• If the fix is template-level, You SHOULD recommend running a pre-deployment validation pipeline (cfn-lint → cfn-guard → change set validation) on the corrected template before redeploying, because re-deploying a broken template reruns the failure cycle

• If the fix is environment-level, You MUST NOT recommend redeploying until the environment issue is confirmed resolved

• If the stack is in UPDATE_ROLLBACK_FAILED, You MUST warn before recommending continue-update-rollback that it is a one-way operation and resources listed in --resources-to-skip will desynchronize from the template

• If the stack is DELETE_FAILED, You SHOULD recommend inspecting the specific resource(s) blocking deletion before re-issuing delete

• You SHOULD offer to help draft the corrected template or the environment fix on request

Examples

Example: IAM permission failure (environment-level)

Stack: my-api-stack (UPDATE_ROLLBACK_COMPLETE)
Region: us-east-1

Root cause (environment-level):
  Resource: OrdersTable (AWS::DynamoDB::Table)
  Status: CREATE_FAILED
  Reason: User: arn:aws:iam::123456789012:role/CFNDeployRole is not authorized
  to perform: dynamodb:CreateTable on resource: arn:aws:dynamodb:us-east-1:...

CloudTrail evidence:
  2026-04-21T14:23:05Z — CreateTable — AccessDenied
  Deeplink: https://console.aws.amazon.com/cloudtrailv2/...

Fix (no template change needed):
  Attach this statement to role CFNDeployRole:
    {
      "Effect": "Allow",
      "Action": ["dynamodb:CreateTable", "dynamodb:DescribeTable"],
      "Resource": "arn:aws:dynamodb:us-east-1:123456789012:table/*"
    }

Next steps:
  1. Apply the IAM policy change
  2. Redeploy the stack (no template changes required)

Example: Resource name conflict (template-level)

Stack: analytics-stack (CREATE_FAILED)
Region: eu-west-1

Root cause (template-level):
  Resource: ReportBucket (AWS::S3::Bucket)
  Status: CREATE_FAILED
  Reason: acme-reports already exists

Fix (template change):
  Make the bucket name unique per stack:
    ReportBucket:
      Type: AWS::S3::Bucket
      Properties:
        BucketName: !Sub "${AWS::StackName}-reports"  # was: acme-reports

Next steps:
  1. Apply the template fix
  2. Run pre-deployment validation (cfn-lint, cfn-guard, change set) on the
     corrected template before redeploying
  3. Delete the failed stack, then re-create with the corrected template

Troubleshooting

"Stack not found" but I know the stack existed

The stack was likely deleted after failure. If you have the Stack ARN (format: arn:aws:cloudformation:<region>:<account>:stack/<name>/<uuid>), pass it as stack_name. CloudFormation retains historical events for deleted stacks for ~90 days via describe-events with the ARN.

describe-events with --filters FailedEvents=true is not recognized

The --filters parameter requires a recent AWS CLI version. Upgrade with pip install --upgrade awscli or brew upgrade awscli. As a fallback, use describe-events without the filter and manually filter for EventType in [PROVISIONING_ERROR, VALIDATION_ERROR].

CloudTrail lookup returns nothing for a known failure

Causes:

• The failure was older than 90 days (CloudTrail Events history limit)

• The CloudTrail trail is in a different region than the stack

• The failing API call was made from a service that does not source from cloudformation.amazonaws.com (e.g., a Lambda-backed custom resource calls AWS APIs from its own execution role, so sourceIPAddress will differ)

For older failures, check the S3 bucket configured for CloudTrail logging, if any.

The first failed event is a downstream effect, not the root cause

Sometimes CloudFormation creates resources in parallel and the first reported failure is a dependency rather than the cause. Inspect all failed events; the root cause is often the one with the most specific ResourceStatusReason (e.g., "Property value is invalid" is more specific than "Dependency resource failed to create").